Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Boral Roof Repair in San Antonio: What to Know First
We provide independent Boral roof repair across San Antonio, from tile replacements on Mission-style homes in Alamo Heights to leak repairs on Boral concrete tile out near Stone Oak. Most Boral repairs we handle are completed in a single visit, and you’ll always see a written price in dollars before any work begins. If you own a Boral roof and something looks wrong, call (903) 354-7802 and we’ll walk you through what we’re seeing and what it’ll take to fix it.
This page is for San Antonio homeowners with Boral roofing who need straight answers about how their tile or steel fails, what repairs actually cost, and who to trust with the work. As an independent Boral service provider, we’re not affiliated with the manufacturer. What we are is a local crew that has repaired enough Boral roofs across Bexar County to know exactly where they break and how to fix them without voiding your warranty.
How Boral Products Fail – and How We Fix Them
- Boral Concrete Tile: cracked barrels from foot traffic. The Boral Barcelona and Capistrano profiles look great on San Antonio homes, but the barrel shape creates a hollow under the crown. A misplaced boot or knee can crack a tile straight through. We replace the cracked unit and inspect the tiles around it for hairline fractures, because one broken barrel usually means someone walked a section they shouldn’t have.
- Boral Steel (formerly Gerard): granule loss and exposed steel at the cut edges. Boral steel shingles and shakes take a beating from San Antonio hail. We regularly see the stone coating worn away at the overlap points, leaving the galvalume core exposed. Left alone, that edge rusts and eventually pinholes. Our fix is replacing the affected panels or sealing the exposed edges with a matched coating, depending on how far it’s gone.
- Valley failures on Boral stone-coated steel. Valleys carry more water than any other part of the roof, and on Boral steel systems, the valley flashing sometimes gets installed too tight or with the wrong underlayment peel. We see this a lot on larger custom homes in Shavano Park. The symptom is a leak that shows up in the ceiling below the valley, often after a wind-driven rain. We open the valley, reset the flashing, and replace any compromised underlayment.
- Vent boot and pipe flashing deterioration on Boral tile and steel alike. The rubber boot around your vent pipes degrades in the San Antonio sun faster than the Boral material around it. On tile roofs, that means pulling the surrounding tiles carefully, replacing the boot, and reinstalling with matching tile. On steel, it’s a retrofit collar that gets sealed and mechanically fastened. Either way, the Boral material usually isn’t the problem – the accessory is.
- Underlayment failure under Boral concrete tile. Concrete tile can last decades, but the felt or synthetic underlayment beneath it has a much shorter life. In older San Antonio neighborhoods like Monte Vista, we see tile roofs where the tile is fine but the underlayment has turned to dust. The fix is a targeted underlayment replacement in the failed area, not a full reroof – unless the damage is widespread. We’ll show you photos either way.
Styles & brands we work with
Our Boral Roof Repair Process
- 1
You call, a person answers. A live person picks up 24/7 at (903) 354-7802. You describe what you’re seeing, we ask a few questions, and we schedule a time that works for your family.
- 2
We inspect the roof and the attic side. We walk the affected area, check the underlayment from inside if accessible, and photograph what we find. You see the photos, not just a summary.
- 3
We decide together: OEM Boral vs. quality aftermarket. If your warranty is active, we lean OEM. If it’s lapsed, we’ll show you the price difference and let you choose. No pressure, no upselling.
- 4
We write the price down. Before anything comes off the roof, you get a written price in dollars. That number doesn’t change unless we find something structural that wasn’t visible on inspection – and we’ll call you before touching it.
- 5
We do the repair and test it. Shoe covers at the door, drop cloths through the hallway, all debris cleared and photographed before we leave. We water-test the repair when possible and walk you through what we did.
- 6
You get the 365-Day Done Right Promise. If the repair doesn’t hold, we make it right. That’s stamped on every job, including yours.
See the difference
Before
After
Before
After
Before
AfterWhat Boral Roof Repair Costs in San Antonio
| Repair Type | Typical Range in San Antonio |
|---|---|
| Single Boral concrete tile replacement | $180 – $400 |
| Vent boot or pipe flashing replacement (tile or steel) | $250 – $550 |
| Valley flashing reset with underlayment patch | $600 – $1,500 |
| Boral steel panel replacement (small section) | $450 – $1,200 |
| Targeted underlayment replacement under concrete tile | $800 – $2,500 depending on area |
The biggest cost drivers are access difficulty, whether the underlayment is involved, and whether matching Boral tile or steel needs to be sourced. Second-story roofs on steep pitches cost more than single-story walkable slopes. You’ll see your exact number in writing before we start. Call (903) 354-7802 for a free estimate.
Why San Antonio Homeowners Call Birchbark Roofing San Antonio for Boral Work
Erik Lindgren and our crew have been working San Antonio roofs for years, and we’ve repaired enough Boral to know the material’s quirks. We also work with GAF, Owens Corning, and CertainTeed, so if a section of your Boral roof is beyond repair and you’re weighing options, we can show you paths forward without a sales script. Our technicians are background-checked and uniformed, so you know exactly who is walking through your door and onto your roof. And every Boral job includes the Cedarwell Care Promise: Clean up like it’s our own home; Ask before we move or touch anything; Respect the family’s time and quiet hours; Explain the price before the work. Birch bark was one of the first roofing materials – light, tough, and made to shed water. We take the same approach. A written price and a straight answer – that’s where we start.
FAQs
Not if the repair is done with compatible materials and proper methods. We’re careful to use OEM or warranty-safe aftermarket components when a Boral warranty is still active. If you have your original warranty paperwork, we’ll review it with you before recommending a repair path.
Most single-tile or flashing repairs are done the same day we arrive. Larger repairs, like a full valley reset or underlayment replacement, usually take one to three days depending on weather and access. We’ll tell you the timeline in writing before we start.
When a Boral roof is still under warranty or the tile profile is still manufactured, we source matching Boral material. If the exact tile is discontinued, we’ll find a compatible profile and show you a photo side by side before ordering. You decide together, never by surprise.
Yes. We coordinate the door schedule with you, keep drop cloths through any interior access path, use pet-safe products where there’s a choice, and photograph the completed clean-up before our crew leaves. If the dog needs to stay inside, we work around it – not the other way around.
That depends on the underlayment and the tile condition. If the tile is sound and the leak is isolated to a boot, flashing, or small underlayment section, repair is almost always the right call. If the underlayment is failing across large areas, replacement makes more sense. We’ll show you photos of what we find and give you both numbers in writing before you decide.
Call (903) 354-7802 for a free estimate on your Boral roof repair in San Antonio. A live person answers, and you’ll get a written price before any work starts.
Written by Erik Lindgren, Owner, Birchbark Roofing San Antonio at Birchbark Roofing San Antonio, serving San Antonio and nearby areas.